3D Sound suppression infills for Surefire SOCOM Suppressors

Product Details

These infills are for these suppressors (Click here)

3D printed infill that proven reducing noise around 30dB

1 dB is a relative unit of measurement equal to one tenth of a bel (B)

Very good for bolt action, HPA, NBB and some GBBs (tested working on AAP01)

Feel free to contact me if you have any questions.

All of our suppressor infills are designed and tested in-house.

V1: Based on classic suppressor inner designs. V2: An enhanced version of V1. V3: A non-traditional design inspired by Tai Chi. This suppressor splits the gas into two streams that collide each other, significantly reducing the gas speed at the exit, making it the most effective option.

Inner Barrel Compatibility: If your inner barrel is longer than your outer barrel, you can still use this infill, but its effectiveness will be reduced.
Trajectory Factor: This refers to the potential impact on trajectory, which varies with different power levels. A higher number indicates a lesser effect on trajectory.
Suppression Effectiveness: This measures how effective the infill is at reducing noise; a higher number indicates a quieter performance.

Important Note : The V3 infill will not suppress sound during dry firing; it only functions when a BB is fired.

Installation Instructions:

V1 & V2: Position the side labelled "Delta Action" at the front.
V3: Position the side with 7 holes at the front.

Disclaimer

Our products are designed exclusively for use with toy replicas and are NOT compatible with any classified weapons.

Free delivery for all orders within UK

3D Sound suppression infills for Surefire SOCOM Suppressors